About EQX Global Group
At EQX Global Group, we believe in sustainable bonding solutions that not only connect businesses but also create a positive impact on people and the planet. Our corporate story is built on the foundation of purpose and our commitment to the Sustainable Development Goals (SDGs) and Environmental, Social, and Governance (ESG) principles.
Contact Us
- PMT 1159, Lorong Perindustrian Bukit Minyak 22, Penang Science Park, Taman Perindustrian Bukit Minyak, 14100 Simpang Ampat, Pulau Pinang, Malaysia
- (604) 5057883, 5057885, 5057886
LOCTITE® 510 MEDIUM STRENGTH HIGH TEMPERATURE RESISTANT GASKET ELIMINATOR FLANGE SEALANT
LOCTITE® 510 MEDIUM STRENGTH HIGH TEMPERATURE RESISTANT GASKET ELIMINATOR FLANGE SEALANT
LOCTITE 510 TB50ML EN/CH/JP
This form-in-place anaerobic-curing gasketing sealant provides high temperature and chemical resistance on close fitting, rigid machined metal flanges.
LOCTITE® 510 is a high-temperature resistant, form-in-place anaerobic-curing sealant, which forms an instant, low-pressure seal when confined in the absence of air between close fitting metal surfaces. Ideal for rigid flanges, especially in transmissions and motor casings. Unprimed gap-fill is 0.25 mm (0.01""). Recommended for use with aluminum and steel substrates.
- For close fitting, rigid metal flanges.
- Temperature resistant up to 204°C (400°F).
- Adapts to surface irregularities and scratches up to 0.25mm (0.01").
- Increases torque capacity of assembled flanges.
- Registered to NSF Category P1.
Technical Information
| Application method | Dispense system, Manual, Screen printing |
| Applications | For close fitting parts, For high temperature applications, Rigid assembly gasketing, Sealing |
| Chemical basis / base | Dimethacrylate ester |
| Color | Pink |
| Cure type | Anaerobic cure |
| Fixture time, Steel | 25.0 min. |
| Gap fill, Unprimed | 0.25 mm |
| Key characteristics | Chemical resistant, For machined, rigid flanges, Strength: medium strength, Thixotropic |
| Number of components | 1 part |
| Operating temperature | -65.0 - 400.0 °F (-55.0 - 200.0 °C ) |
| Physical form | Gel |
| Recommended for use with | Metal: aluminum, Metal: steel |
| Storage temperature | 8.0 - 21.0 °C |
| Viscosity, 20 RPM | 90000.0 mPa·s (cP) |
- TDS: Download
No Article Found
